Table of Contents
Advertisement
On the Configure Internet Connection – Connection Type page, select
(3).
IP over ATM (IPoA) then click "Next".
On the WAN IP Settings page, select Use the following IP address and
(4).
Use the following DNS Server Address, then key in the information
that your ISP offered, e.g.:
WAN IP Address: 10.3.80.81
WAN Subnet Mask: 255.255.255.248
Primary DNS server: 168.95.1.1
Secondary DNS server: 168.95.192.1
Check the Enable NAT box. And click" Next".
(5).
On the Configure LAN side Settings page, key in the information for
(6).
your LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Check the network information. Make sure the settings match the
(7).
settings provided by ISP. Click Finish.
Now the IAD is well configured. You can access into Internet.
(8).
Wireless IAD User Manual
36
Advertisement
Table of Contents
