Table of Contents
Advertisement
settings. Then, select Use the following DNS Server Address and key
in the information that your ISP offered, e.g.:
Primary DNS server: 168.95.1.1
Secondary DNS server: 168.95.192.1
Check the Enable NAT box. And click Next.
(5).
On the Configure LAN side Settings page, key in the information for
(6).
your LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Check Configure the second IP Address and Subnet Mask for LAN
(7).
Interface and enter the information needed, e.g.,
Secondary IP Address: 10.3.80.81
Subnet mask: 255.255.255.248
Click Next.
Check the network information on the Summary page. Make sure the
(8).
contents match the settings provided by your ISP. Click Finish.
Now the IAD is well-configured. You can access the Internet.
(9).
Wireless IAD User Manual
40
Advertisement
Table of Contents
