Table of Contents
Advertisement
6.
On the Configure LAN side Settings page, enter the IP address and
subnet mask for your LAN, e.g.:
Primary IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
Choose DHCP Server Off and click Next.
7.
Check the network information on the Summary page. Make sure the
contents match the settings provided by your ISP. Click Finish.
8.
Refer to the TCP/IP properties, specify an IP Address, and fill in other
information needed, e.g.:
IP Address: 10.3.86.81
Subnet Mask: 255.255.255.248
Gateway: 10.3.86.1
Preferred DNS server: 168.95.1.1
9.
Click OK. Now the IAD is well-configured. You can access to the
Internet.
Wireless IAD User Manual
42
Advertisement
Table of Contents
