4. Installation
2
1
4
90º
5
8
2x
7
26
n Rotate instrument panel
The control panel is on the front as standard, but can easily be rotated
so that it is on the short side.
1. Unscrew the 4 lateral holding screws in the control panel.
2. Remove the protective cover.
3. Unscrew the 2 bottom plate socket screws.
4. Lift up the instrument panel with the bottom plate.
5. Turn the instrument panel and the bottom plate into position on the
6. Slide the lips of the bottom plate into the appropriate slots.
7. Tighten the 2 bottom plate socket screws.
3 2x
8. Refit the protective cover.
9. Screw the 4 lateral holding screws back in.
9
6
T004028-E
short side.
C 330 ECO - C 630 ECO
31/05/2012 - 7600532-01