Table of Contents
Advertisement
5 0 / 2 0 0 / 4 0 0
u r S e r v i c e
B r a s s K e y I n s t a l l a t i o n
H o
NOTI CE
New Brass Key
Side-to-side movement of the upper tube is an indication that the brass
keys are worn and need to be replaced. Vertical lines on the key are an
indication that the key is worn.
New brass keys must be the same size and have the same number of
etched lines
as the original brass keys for proper function.
Refer to the RockShox® spare parts catalog at
www.sram.com/service
for a list of brass key kits available.
Worn Brass Key
Apply a liberal amount of SRAM® Butter grease onto each key slot.
1
Install new brass keys into the key slots. The orientation of the brass
keys is not critical.
Apply a liberal amount of SRAM Butter grease onto the brass keys and
upper post.
Slide the top cap up and down to lubricate the top cap seal.
Brass Key Installation
38
Hide quick links:
Advertisement
Table of Contents
