Lower Post Installation - SRAM Reverb Stealth Service Manual

5 0 / 2 0 0 / 4 0 0 u r S e r v i c e L o w e r P o s t I n s t a l l a t i o n
H o
Apply a liberal amount of SRAM® Butter grease onto the seal head
1
bushing.
Apply a liberal amount of SRAM Butter grease to the inside of the lower
2
post tube.
Install the lower post onto the upper post.
3
Center the bottomout o-ring and foam ring, squeeze the inner seal
head bushing, and slide the lower post down over the seal
head bushing.

Lower Post Installation

37