Parts, Tools, And Supplies - SRAM Reverb Stealth Service Manual

P a r t s , T o o l s , a n d S u p p l i e s
Parts
• Reverb™ Stealth B1 Service Kit - 200 hours
• Reverb Stealth B1 Service Kit - 400 hours
• Reverb Stealth A2 Service Kit - 200 hours
• Reverb brass keys, quantity 3 (use correct size)
• Reverb remote lever hose barb (optional)
Safety and Protection Supplies
• Apron
• Clean, lint-free shop towel
• Nitrile gloves
• Oil pan
• Safety glasses
Lubricants and Fluids
• Friction paste
• Isopropyl alcohol or RockShox® Suspension Cleaner
• RockShox Reverb hydraulic fluid (included with RockShox Bleed kit)
• SRAM® Butter (grease)
RockShox Tools
• Reverb IFP Height Tool
• RockShox Bleeding Edge™ Tool (Reverb 1x™ Remote)
• RockShox Bleed kit
• RockShox Oil Level Adjuster
• RockShox shock pump (300 psi max)
• RockShox vise block inserts (3-hole)
Always wear safety glasses and nitrile gloves when working with grease and Reverb hydraulic fluid.
Place an oil pan under the RockShox product during service.
Do not allow Reverb hydraulic fluid to come into contact with disc brake levers, calipers, pads, rotors, or braking surfaces. If hydraulic fluid contacts
brake pads, the brake pads must be replaced. Use isopropyl alcohol to remove hydraulic fluid from any brake or braking surface. Failure to remove
hydraulic fluid from brakes and braking surfaces can damage components and reduce brake performance, and may result in serious injury and/or
death to the rider. Remove brake components before performing hose replacement and hydraulic remote bleed procedures.
Bicycle Tools
• Bicycle work stand
• Park Tool® AV-5 Axle and Spindle Vise Inserts
Tools
• Adjustable open end wrench (≤ 34 mm) (optional)
• Bench vise
• Crowfoot sockets: 7, 9, 10, 11, 23, 26, 34 mm
• Dowel - non-metallic
• Flat soft jaw vise inserts (aluminum)
• Hex bit socket: 4 mm
• Hex wrenches: 1.5, 4 mm
• Metric tape measure or ruler
• Needle nose pliers
• Open end wrenches: 6, 7, 9, 10, 11, 13, 23, 26, 34 mm
• Pick
• Plastic cable ties (quantity 7-10, 15-20 cm length)
• Plastic mallet
• Retaining ring pliers (A2)
• Socket: 9 mm
• Socket wrench
• Torque wrench (see
• TORX® bit sockets: T10, T25
• TORX wrenches: T6, T10, T25 (included with RockShox Bleed kit)
• Wire cutters
SAFET Y IN STRUCTIONS
⚠ WARN ING
Torque Values chart for range)

Parts, Tools, and Supplies

9