Lcd Display - Emerson Rosemount 3051 Reference Manual

Section 3: Configuration
November 2012
Field communicator
Traditional 4-20 mA Fast Keys
Traditional 1-5 Vdc Fast Keys
Device Dashboard Fast Keys
AMS device manager
Right click on the device and select Configure from the menu.
1.
2.
3.10

LCD display

The LCD display connects directly to the interface board which maintains direct access to the
signal terminals. The display indicates output and abbreviated diagnostic messages. A display
cover is provided to accommodate the display.
For 4-20 mA HART output, the LCD display features a two-line display. The first line of five
characters displays the actual measured value, the second line of six characters displays the
engineering units. The LCD can also display diagnostic messages. Refer to
For 1-5 Vdc HART Low Power output, the LCD display features a single-line display with four
characters that display the actual value. The LCD can also display diagnostic messages. Refer to
Figure
Figure 3-12.
58
In the Basic Setup tab, enter the damping value in the Damp field, click Apply.
After carefully reading the warning provided, select yes.
3-12.
4-20 mA HART 1-5 Vdc HART Low Power
Reference Manual
00809-0100-4001, Rev JA
1, 3, 6
1, 3, 6
2, 2, 1, 2
Figure 3-12.
Configuration