Emerson Rosemount 3051 Reference Manual page 75

Reference Manual
00809-0100-4001, Rev JA
Field communicator
Traditional 4-20 mA Fast Keys
Traditional 1-5 Vdc Fast Keys
Device Dashboard Fast Keys
1.
2.
a.
b. Ensure that the location to which the data will be saved is set to MODULE. If it is not,
c.
d. Ensure that the data type is set to STANDARD. If the data type is NOT STANDARD,
e. Select SAVE.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
When finished, the Field Communicator informs you of the status. Repeat Steps
configure another transmitter.
Configuration
Completely configure the first transmitter.
Save the configuration data:
Select SAVE from the Field Communicator HOME/ONLINE screen.
select 1: Location to set the save location to MODULE.
Select 2: Name, to name the configuration data. The default is the transmitter tag
number.
select 3: Data Type to set the data type to STANDARD.
Connect and power the receiving transmitter and Field Communicator.
Select the back arrow from the HOME/ONLINE screen. The Field Communicator menu
appears.
Select 1: Offline, 2: Saved Configuration, 1: Module Contents to reach the MODULE
CONTENTS menu.
Use the DOWN ARROW to scroll through the list of configurations in the memory
module, and use the RIGHT ARROW to select and retrieve the required configuration.
Select 1: Edit.
Select 1: Mark All.
Select SAVE.
Use the DOWN ARROW to scroll through the list of configurations in the memory
module, and use the RIGHT ARROW to select the configuration again.
Select 3: Send to download the configuration to the transmitter.
Select OK after the control loop is set to manual.
After the configuration has been sent, select OK to acknowledge that the loop can be
returned to automatic control.
Section 3: Configuration
November 2012
left arrow, 1, 2
left arrow, 1, 2
3, 4, 3
3 through 13 to
65