Emerson Rosemount 3051 Reference Manual page 76

Section 3: Configuration
November 2012
Note
The transmitter receiving cloned data must have the same software version (or later) as the
original transmitter.
AMS device manager creating a reusable copy
To create a reusable copy of a configuration perform the following procedure:
1.
2.
3.
4.
5.
Note
A device icon can also be copied by dragging and dropping a device template or any other
device icon from AMS Device Manager Explorer or Device Connection View into the User
Configurations window.
The "Compare Configurations" window appears, showing the Current values of the copied
device on one side and mostly blank fields on the other (User Configuration) side.
6.
7.
AMS device manager applying a user configuration
Any amount of user configurations can be created for the application. They can also be saved,
and applied to connected devices or to devices in the Device List or Plant Database.
Note
When using AMS Device Manager Revision 6.0 or later, the device to which the user
configuration is applied, must be the same model type as the one created in the user
configuration. When using AMS Device Manager Revision 5.0 or earlier, the same model type
and revision number are required.
To apply a user configuration perform the following procedure:
66
Completely configure the first transmitter.
Select View then User Configuration View from the menu bar (or click the toolbar
button).
In the User Configuration window, right click and select New from the context menu.
In the New window, select a device from the list of templates shown, and click OK.
The template is copied into the User Configurations window, with the tag name
highlighted; rename it as appropriate and press Enter.
Transfer values from the current configuration to the user configuration as appropriate
or enter values by typing the values into the available fields.
Click Apply to apply the values, or click OK to apply the values and close the window.
Reference Manual
00809-0100-4001, Rev JA
Configuration