Warnings; Approved Manufacturing Locations; European Directive Information; Ordinary Location Certification For Factory Mutual - Emerson Rosemount 3051 Reference Manual

Appendix B: Product Certifications
November 2012
B.2.1

Warnings

Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please review
this section of the Model 3051 reference manual for any restrictions associated with a safe
installation.


Process leaks may cause harm or result in death.

Electrical shock can result in death or serious injury.

Cable gland and plug must comply with the requirements listed on the certificates.
B.3

Approved manufacturing locations

Emerson Process Management - Rosemount Inc. — Chanhassen, Minnesota, USA
Emerson Process Management — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited — Singapore
Emerson Process Management — Beijing, China
Emerson Process Management — Daman, India
B.4

European directive information

The most recent revision of the EC declaration of conformity can be found at www.emersonpro-
cess.com.
B.4.1

Ordinary location certification for factory mutual

As standard, the transmitter has been examined and tested to determine that the design meets
basic electrical, mechanical, and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
176
Before connecting a HART-based communicator in an explosive atmosphere, make
sure the instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
In an Explosion-Proof/Flameproof installation, do not remove the transmitter covers
when power is applied to the unit.
Install and tighten process connectors before applying pressure.
Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
Reference Manual
00809-0100-4001, Rev JA
Product certifications