Utilities Supported - AXIOMTEK CAPA500 User Manual

 USB Interface
 Four USB ports on the rear I/O: Three for USB 3.0 and one for USB 2.0.
 Two USB 2.0 ports in 2x5-pin internal wafer connector.
 Display
 One 15-pin D-Sub as VGA connector. Max. resolution is 1920x1200 @ 60Hz.
 One 2x20-pin connector for 18/24-bit single/dual channel LVDS and one 8-pin
inverter connector. LVDS resolution is up to 1920x1200 in 24-bit dual channels.
 One HDMI. Max. resolution is 4096x2160 @ 30Hz.
 Watchdog Timer
 1~255 seconds or minutes; up to 255 levels.
 Ethernet
 LAN1: Intel
Wake-on-LAN and PXE Boot ROM.
 LAN2: Intel
Wake-on-LAN and PXE Boot ROM.
 Audio
 HD audio compliant with Realtek ALC662.
 Line-out and line-in/MIC-in in 1x10-pin wafer connector.
 Expansion Interface

One full-size PCI-Express Mini Card socket complies with PCI-Express Mini Card
Spec. V1.2.
 ZIO Connector
 60-pin high speed connector; containing one PCI Express x1, one USB 2.0, one USB
3.0, one LPC and one SMBus.
 Power Input
 One 2x2-pin connector.
 +12V only DC-in.
 AT auto power on function supported.

Power Management
 ACPI (Advanced Configuration and Power Interface).
 Form Factor
 3.5" form factor.
All specifications and images are subject to change without notice.
Note
1.3

Utilities Supported


Chipset and graphics driver

Ethernet driver (Intel
 Audio driver
 XHCI driver
 iAMT utility and drivers
Introduction
CAPA500 Intel
®
i211AT supports 1000/100/10Mbps Gigabit/Fast Ethernet with
®
i219LM supports 1000/100/10Mbps Gigabit/Fast Ethernet with
®
i211AT and i219LM)
® TM
Core Processor Family 3.5" Board
3