Table of Contents
Advertisement
shock is less likely if you disconnect the grounding connection before you work on the
batteries.
•
Proper disposal of batteries is required. Refer to local codes for disposal requirements.
•
Do not dispose of batteries in a fire. Batteries may explode when exposed to flame.
•
Keep the UPS door closed and front panels installed to ensure proper cooling airflow and to
protect personnel from dangerous voltages inside the unit.
•
Do not install or operate the UPS system close to gas or electric heat sources.
•
The operating environment should be maintained within the parameters stated in this
manual.
•
Keep surroundings uncluttered, clean, and free from excess moisture.
•
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of
the equipment.
CAUTION
To prevent damage to the wiring channel and wiring in the UPS cabinet base when lifting or
moving the cabinet:
•
Lift and move the cabinet using only the front or rear forklift slots.
•
Verify that the forklift forks are in a horizontal position before inserting them into the forklift
slots. DO NOT angle fork tips upward.
•
Insert the forks all the way through the base. DO NOT insert forks partially into the base to
move the cabinet.
•
Forks may be partially inserted into the front or rear forklift slots for minor positioning if the
forks are kept in a horizontal position with no upward angling.
•
DO NOT use the forklift slots on the end of the cabinet to move the cabinet.
•
End forklift slots may be used for minor positioning if the forks are kept in a horizontal
position with no upward angling.
If these instructions are not followed, damage to the wiring channel and wiring will occur.
9395P 250 kVA / 275 kVA / 300 kVA
User's and Installation Guide
10
Advertisement
Table of Contents
