Table of Contents
Advertisement
Function
Subfunction
High Alert Timer
System Level 1 Setup Password
Function Selection
Change Password
Change Password Save
Time Format
Set Date and
Time MM/DD/
YYYY
Set Date and
Time DD/MM/
YYYY
Com Port Selection
Table 7-6. Display Menu Operation (continued)
107
Operation
The High Alert Timer screen sets the length of time the all UPMs remain active
before transferring back to Variable Module Management System mode. The time
can be set in 10 minute increments from 0 to 990 minutes. Select HIGH ALERT
TIMER from the Module Management System Setup screen to display the High
Alert Timer screen. Use the up or down arrow pushbutton to set the time. Press
SAVE or ABORT. Once the action is completed, the Module Management System
Setup screen is displayed.
The System Setup Level 1 screen can be used to set the UPS date and time, set
the serial ports, change the Level 1 password, and log out of Level 1. In addition,
the Level 0 functions are available. A password is required to access the Level 1
functions. To enter the password, select ENTER PASSWORD from the System
Setup Level 0 menu to display the Enter Password screen. Use the left or right
arrow pushbutton to select the password character position. Use the up or down
arrow pushbutton to change the password character. Once the password is
entered, press the DONE pushbutton. The System Setup Level 1 menu screen is
displayed. The default password is L1.
Use the up or down arrow pushbutton to highlight the setup function screen
desired, then press the SELECT pushbutton to display the function screen. The
Level 1 screen times out after
60 minutes or can be logged out at any time by selecting the LOG OUT function
from the menu screen.
The Change Password screen allows the System Setup Level 1 password to be
changed. Select CHANGE PASSWORD from the System Setup Level 1 menu to
display the Change Password screen. Use the left or right arrow pushbutton to
select the password character position. Use the up or down arrow pushbutton to
change the password character. Once the new password is entered, press the
DONE pushbutton. The Change Password Save screen is displayed.
The Change Password Save screen lets you save the new password, retry another
password, or abort the password change. Press SAVE, RETRY, or ABORT. If SAVE
or ABORT is pressed, the action is completed, and the System Setup screen
displays. If RETRY is pressed, the Change Password screen is redisplayed.
The Time Format Setup screen allows the selection of either month/day/year or
day/month/year formats for display on the screen and for logging events in the
Event and History Logs. Select SET DATE AND TIME from the System Setup Level
1 menu to display the Time Format Setup screen. Use the up or down arrow
pushbutton to highlight the desired format, then press the SELECT pushbutton to
display the Set Date and Time screen. To return to the System Setup screen, press
the ESC pushbutton.
The Set Date and Time MM/DD/YYYY screen allows the internal date and time of
the UPS to be set in the month/day/year format. The date and time information is
used for display on the screen and for logging events in the Event and History
Logs. Use the left or right arrow pushbutton to highlight the setting to be changed.
Use the up or down arrow pushbutton to make the change. When finished making
changes, use the left or right arrow pushbutton to highlight SAVE and the up or
down arrow pushbutton to select YES. To complete the save function and return to
the System Setup screen, select the return arrow pushbutton.
The Set Date and Time DD/MM/YYYY screen allows the internal date and time of
the UPS to be set in the day/month/year format. The date and time information is
used for display on the screen and for logging events in the Event and History
Logs. Use the left or right arrow pushbutton to highlight the setting to be changed.
Use the up or down arrow pushbutton to make the change. When finished making
changes, use the left or right arrow pushbutton to highlight SAVE and the up or
down arrow pushbutton to select YES. To complete the save function and return to
the System Setup screen, select the return arrow pushbutton.
The Com Port Setup screen allows selection of the serial COM port to set up.
Select COM PORT SETUP from the System Setup Level 1 menu to display the
COM Port Setup screen. Use the up or down arrow pushbutton to highlight the
COM port to be set up, then press the SELECT pushbutton. To return to the
System Setup screen, press the ESC pushbutton.
9395P 250 kVA / 275 kVA / 300 kVA
User's and Installation Guide
Advertisement
Table of Contents
