Wiring; Power; Connecting Sitrans Probe Lr - Siemens Sitrans Probe LR Operating Instructions Manual

Wiring

Power

WARNINGS:
dc terminals shall be supplied from an SELV
with IEC-1010-1 Annex H.
All field wiring must have insulation suitable for rated voltages.

Connecting SITRANS Probe LR

Unscrew the two lid screws to access the
terminal block.
1 2
, ,
,
1.
Safety Extra Low Voltage
2.
If cable is routed through conduit, use only approved suitable-size hubs for
waterproof applications.
Page 16 SITRANS Probe LR – INSTRUCTION MANUAL
lid screw (1 of 2)
strain
2
relief
(or NPT cable entry)
1
source in accordance
terminal block
locking collar
7ML19985HR02