TVT (Time Varying Threshold) Adjustment Parameters
(P831 to P839)
Factory settings are indicated by an asterisk (*) in the parameter tables, unless
Note:
explicitly described.
First SITRANS Probe LR learns the echo profile. Then the learned profile, or part of the
learned profile, is used to screen out false echoes.
The following parameters are for authorized Siemens Service personnel or technicians
familiar with Siemens echo processing techniques. View the echo profile first, before
attempting to modify these parameters.
P831 Manual TVT Shaper
This parameter is for use only by Siemens service personnel.
Note:
Turns the TVT Shaper ON or OFF.
P832 Manual TVT Shaper Adjust
This parameter is for use only by Siemens service personnel.
Note:
7ML19985HR02
SITRANS Probe LR – INSTRUCTION MANUAL
Page 63