Siemens Sitrans Probe LR Operating Instructions Manual page 74

P922 Space Measurement
Displays the distance between the monitored surface and Span / process full level (P007).
Values (view only)
P923 Distance Measurement
Displays the distance between the monitored surface and the reference point
Values (view only)
P924 Volume Measurement
The display for P924 reads - - - -, when volume calculation is not enabled at P050
Note:
(P050 = 0).
The calculated vessel capacity in Maximum Volume (P051) or percent of Maximum
Volume (volume calculation must be enabled at P050).
Values (view only)
Related Parameters
P999 Master Reset
Following a Master Reset, complete reprogramming is required.
Note:
Resets all parameters to their factory settings, with the following exceptions:
• P000 and P069 are not reset.
• The learned TVT curve is not lost.
Use this feature after upgrading software:
1. Select P999.
2. Press CLEAR
3. Reset complete.
(Note: Reset takes several
seconds to complete.)
1.
For the reference point for the standard model, see
Page 68 SITRANS Probe LR – INSTRUCTION MANUAL
Range
Range
Range
P051 Maximum Volume
P050 Vessel Shape
then ENTER to Clear All and initiate reset.
–99999 to 99999
–99999 to 99999
–99999 to 99999
SITRANS Probe LR: Dimensions
1
.
on page 15.
7ML19985HR02