Installation Records (P341 To P346) - Siemens Sitrans Probe LR Operating Instructions Manual

P214 4 mA Output Trim
This parameter is for use only by Siemens service personnel.
Note:
Calibrates the 4 mA output.
P215 20 mA Output Trim
This parameter is for use only by Siemens service personnel.
Note:
Calibrates the 20 mA output.

Installation Records (P341 to P346)

Factory settings are indicated by an asterisk (*) in the parameter tables, unless
Note:
explicitly described.
P341 RUN Time
Displays the number of uninterrupted 24 hour periods that the device has been operating.
Values (view only)
Related parameters
P341 is updated once a day.
• If power is cycled before 24 hours have passed, the run time will not be updated.
• If an instrument is powered down on a regular basis, P341 will not have an
accurate value.
P342 Power-On Resets
The number of times power has been applied since the date of manufacture.
Values (view only)
Related parameters
This parameter is updated every time the instrument is reset or is powered up.
Page 52 SITRANS Probe LR – INSTRUCTION MANUAL
Range
Default
P342 Power-on Resets
Range
P341 RUN Time
0 to 99999 (days)
0
0.0 to 99999
7ML19985HR02