Application Examples; Support; Abbreviations And Identifications - Siemens Sitrans Probe LR Operating Instructions Manual

WARNING: Changes or modifications not expressly approved by
Siemens could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Note:
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own expense.

Application Examples

The application examples used in this manual illustrate typical installations using
SITRANS Probe LR. Because there is often a range of ways to approach an application,
other configurations may also apply.
In all examples, substitute your own application details. If the examples do not apply to
your application, check the applicable parameter reference for the available options.
Standard applications are found in the main body of the manual: for more specialized
applications, please see

Support

If you have questions you can access our 24-hour hotline at:
www.siemens.com/automation/support-request.
Phone: +49 180 50 50 222

Abbreviations and Identifications

Short
Long Form
form
A/D Analog to digital
Conformitè Europèene / Factory
CE / FM /
Mutual / Canadian Standards
CSA
Association
C Internal capacitance
i
D/A Digital to analog
DAC Digital Analog Converter
DCS Distributed Control System
Page 2 SITRANS Probe LR – INSTRUCTION MANUAL
Appendix F: Special Applications
, page 98.
Description
safety approval
control room apparatus
Units
7ML19985HR02