To Access A Secondary Index And Change A Value - Siemens Sitrans Probe LR Operating Instructions Manual

To access a secondary index and change a value:

Notes:
• In a parameter with a secondary index, the ARROW keys
whichever index was most recently changed.
• When you first access a parameter, the ARROW keys control the primary index
(parameter number).
• After the secondary index is changed, the ARROW keys control the secondary
index.
• When the primary index is changed, the ARROW keys revert to the primary index.
1. Select the parameter number, for example P054: the secondary index is
displayed in the auxiliary reading.
2. Press DISPLAY
3. Key in the address of the desired index, or use the ARROW keys
scroll to the desired secondary index number, then press ENTER
4. Key in the new index value and press ENTER
5. Press DISPLAY
number to select a different parameter.
1.
This focusses control on the secondary index.
Page 36 SITRANS Probe LR – INSTRUCTION MANUAL
1
twice (the auxiliary reading field goes blank).
twice, then use the ARROW keys or key in the parameter
control
.
.
7ML19985HR02
to