Table of Contents
Advertisement
HW configuration
SW configuration
Power supply
Channel 1 HART
Current output HART
Channel 1 MODBUS
Channel 1 PROFIBUS
Channel 2 output
Current, Frequency, Pulse and Status
Outputs: Current, Frequency, Pulse and Status
Channel 3 & 4 Input and output
Inputs: Digital
Channel 3 & 4 Relay
Status output
Figure 4-7
Terminals/configuration overview
Ex and non-Ex versions
• For Ex versions active or passive current output is preselected at ordering and cannot be
changed.
• Non-Ex versions can be connected as either active or passive.
4.6.1.2
Wiring tool
Use the wiring tool for connecting the cables in the compact enclosure transmitter.
The wiring tool is located in the application terminal compartment.
Figure 4-8
1. Insert wiring tool hook into receptor slot.
2. Press wiring tool wedge into top slot to spread clamp plates.
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF
Power supply
1
2
3
4
L/+
N/-
Active/+
Active/ -
Passive/+
In
+ (B)
- (A)
In
+ (B)
- (A)
Wiring tool location
4.6 Connecting industrial enclosure
Terminals
Ch1
Ch2
5
6
7
8
9
Passive/-
Out
+ (B)
- (A)
Out
+ (B)
- (A)
Active/+
Active/ -
Passive/+ Passive/-
Connecting
Ch3
10
11
12
13
14
Active/+
Active/ -
Active/+
Active/ -
Passive/+
Passive/-
Passive/+ Passive/-
NO
NO
NO
NC
NC
Ch4
15
16
NO
NC
NC
57
Advertisement
Table of Contents
