Testing And Applying Simulations - EFI RIP STATION 5000 User Manual

6
6-10 Simulation
T
O REMOVE THE DEFAULT SIMULATION WITH THE
C :
ALIBRATOR
1. Start the Fiery Print Calibrator.
2. Choose Set Default Simulation to None from the Server menu.
3. When prompted, verify that you want to proceed with removing the simulation.
The current simulation is removed.

Testing and applying simulations

You can view a printed sample of a simulation before you apply it to your RIP Station.
You can print:
• Comparison Page—This page is provided with Fiery Print Calibrator and shows a
comparison of an image with and without the simulation.
• User defined CALIB.EPS in Hold Queue— You can create an Encapsulated
PostScript (EPS) file in another application and name it CALIB.EPS. Then print the
file to the Hold Queue of the RIP Station from your application or save it as an EPS
file and download it to the Hold Queue with the Fiery Downloader.
T :
O TEST A SIMULATION
1. Click Test Simulation in the Fiery Print Calibrator main window.
2. Specify a page and a paper tray, and click Print.
F P
IERY RINT