Chapter 3: Printing With Mac Os Computers; Printing To The Rip Station; Selecting The Rip Station In The Chooser - EFI RIP STATION 5000 User Manual

3

3-1 Printing to the RIP Station

Chapter 3:
Printing with
Mac OS
Computers
T
O SELECT THE
1. Make sure the RIP Station is connected to your network and is turned on.
2. Select Chooser from the Apple menu.
3. Click the AdobePS icon.
4. If your network is divided into zones, select the zone in which the RIP Station is
You can print from a Mac OS computer to the RIP Station just as you would print to
any other printer. First, select the RIP Station as the current printer in the Chooser,
then print the file from within your application. Depending on the application and
printer driver you are using, you may need to use the Page Setup dialog box to set
printing options after you select the RIP Station in the Chooser.
This chapter provides information on printing using the Adobe PostScript Printer
Driver (provided with the RIP Station user software).
Printing to the RIP Station
After you have installed the Adobe PostScript printer driver included with the user
software, you can adjust printer settings in the Print Options dialog box for the
RIP Station.
For information on achieving the best printing results from specific applications, see
the Color Printing Guide.

Selecting the RIP Station in the Chooser

To print to the RIP Station, you must first select it in the Chooser. The RIP Station
remains the default printer until you choose a different printer.
RIP S
TATION AS THE CURRENT PRINTER
located.
: