Changing Print Settings For A Job - EFI RIP STATION 5000 User Manual

5
5-9 Using the Fiery Spooler

Changing print settings for a job

You can set certain printing parameters for a job in the Override Print Settings dialog
box. The settings in this dialog box override the settings in the Print Options dialog
box and the Control Panel Printer Setup.
You can change printing parameters only for jobs in the Hold, Print, and Printed
queue sections of the Fiery Spooler main window.
You can change print settings only for your own jobs; system administrators who enter
the Fiery Spooler password can change print settings for any job.
T
O CHANGE PRINT SETTINGS FOR A JOB
1. Double-click a job or select the job and choose Override Print Settings from the Edit
menu.
The Override Print Settings window appears.
2. Choose the new settings from the pop-up menus.
If you select Default Settings, the job will use the settings in the Print dialog box.
For information about these options, see Appendix A, "Print Options."
3. Click OK.
: