Activity Light; Buttons - EFI RIP STATION 5000 User Manual

1
1-2 Operating the RIP Station

Activity light

The activity light indicates the current RIP Station activity. If the light is:
Solid red
Flashing red
Solid green
Flashing green
No light

Buttons

Line selection
buttons
Up and down
button
Menu button
The RIP Station has just been turned on and is about to
begin startup diagnostics, or there is an error that prevents
the RIP Station from processing or printing.
There is an error causing printing to be disabled, but the
RIP Station is still processing. If the error is cleared, the light
changes to green; if the error is not cleared, the light changes
to solid red when the job is finished processing.
The RIP Station is idle.
The RIP Station is performing startup diagnostics,
processing or printing a job, or communicating with a
remote computer—for example, through the Fiery Spooler.
The RIP Station is off.
There are four line selection buttons on the right side of the
Control Panel. Use these buttons to select the command
displayed on the corresponding line of the display window. A
special character appears in the display window next to a
button when it is active.
Use to scroll to different screens in multi-screen lists, to select
Setup options from a list of available options, and to select
alphanumeric characters.
Press to view other screens. The Control Panel displays the
Info Status screen with information about the status of the
RIP Station. If you press the Menu button, the Functions
menu is displayed and you can perform additional
operations. If a job is processing or printing, press the Menu
button to display the RIP Status screen or Print Status
screen.