Mac Os Computers - EFI RIP STATION 5000 User Manual

xiv Before You Begin
With Windows 95
• Microsoft Windows 95 with IPX/SPX networking protocol set up
With Windows 3.1x
• Microsoft Windows version 3.1 or later
• IPX/SPX networking protocol set up
• MS-DOS version 5.0 or later
With Windows NT 3.51 or 4.0
• Microsoft Windows NT with TCP/IP networking protocol set up
Windows NT version 3.51 users can use the Windows Printer Driver to print,
N :
OTE
but PostScript Level 2 features will not be available. Windows NT version 4.0 users
can access PostScript Level 2 features.

Mac OS computers

To print with a Mac OS computer you need:
• Any Mac OS-based computer that has at least 4MB of RAM and EtherTalk
installed
• A CD-ROM drive
For installing user software, you need a Mac OS computer with a CD-ROM drive.
You can install printer drivers either from the User Software CD or via the internet
with the Fiery WebTools Installer.
For installing system software on the RIP Station, you can connect an external
CD-ROM drive to the RIP Station, or you can connect a Windows computer to the
parallel port of the RIP Station and use the Windows computer CD-ROM drive.
• Apple System software version 7.0 or later
• The Adobe ® PostScript
• To use the paging feature of Fiery Spooler, an alphanumeric pager and PageNOW!
software version 1.5 or later. In the United States and Canada, PageNOW! is
available from Mark/Space Softworks: 1-800-799-1718.
• To use the Fiery WebTools, Netscape Communicator version 4.0.1 or later, a color
monitor, and the IP address or DNS name of the RIP Station
® printer driver included with the RIP Station user software)
® Phase 2