Ipx (Novell); Unix (Tcp/Ip); Parallel Port; Specifications - EFI RIP STATION 5000 User Manual

xv Specifications

IPX (Novell)

To print with an IPX (Novell) network, you need:
• A Novell file server running Novell NetWare software version 3.11, 3.12, or 4.0 that
supports Frame Ethernet SNAP, Ethernet II, 802.3, or 802.2

UNIX (TCP/IP)

To use the RIP Station with a UNIX workstation, you need:
• A workstation with standard TCP/IP connectivity (for example, Sun SPARCstation
or Silicon Graphics workstation)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpr protocol)

Parallel port

To use the RIP Station parallel port, you need:
• Windows computer with an 80286 processor or higher and at least 1MB RAM
• Parallel cable with 36-pin connector
Specifications
• CPU R4700, 133 MHz
• 32MB of memory
• Internal 2.1GB hard disk drive
• Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
• Supports EtherTalk Phase 2
• Supports thinnet (by transceiver), thicknet, and twisted pair cabling
• Supports 100BaseT
• Built-in EFICOLOR color management
• Adobe PostScript 3 support (for Windows 95 and Mac OS)
• 136 PostScript 3 fonts