Checking The Current Simulation - EFI RIP STATION 5000 User Manual

6
6-4 Simulation

Checking the current simulation

The Fiery Print Calibrator allows you to work with press simulations provided with
your RIP Station, or you can customize simulations to suit the specific needs of your
printing environment. Before you print or change the simulation currently in use, you
should check the current simulation and when it was last modified.
T
O VIEW INFORMATION ABOUT THE CURRENT SIMULATION
1. Start the Fiery Print Calibrator.
2. Select the RIP Station in the Chooser window and click Connect or OK.
The text under the Select Simulation button in the Fiery Print Calibrator main
window displays information about the currently selected simulation.
The icon buttons represent the main Fiery Print Calibrator functions. The arrows
between the buttons indicate that you perform tasks in a particular sequence. The
current status is displayed at the bottom of the window. The functions unavailable at a
particular time are dimmed and cannot be selected.
: