Using An Auxiliary Monitor - HIKVISION DS-7600NI-Q1 Series User Manual

PTZ
Output Mode
Aux Monitor
 The dwell time of the live view configuration must be set before using Start Auto-switch.
 If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation
is disabled; you need to switch back to the Main output with the MAIN/AUX button on the
front panel or remote.
 If the corresponding camera supports intelligent function, the Reboot Intelligence option is
included when right-clicking mouse on this camera.

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features
include:
 Single Screen: Switch to a full screen display of the selected camera. Camera can be selected
from a dropdown list.
 Multi-screen: Switch between different display layout options. Layout options can be selected
from a dropdown list.
 Next Screen: When displaying less than the maximum number of cameras in Live View, clicking
this feature will switch to the next set of displays.
 Playback: Enter into Playback mode.
 PTZ Control: Enter PTZ Control mode.
Network Video Recorder User Manual
Enter the PTZ control interface.
Four modes of output supported, including Standard, Bright,
Gentle and Vivid.
Switch to the auxiliary output mode and the operation for
the main output is disabled.
Figure 3-1 Right-click Menu
59