Nellcor OXIMAX N-595 Service Manual page 35

Test #4: Light
N-595
6. The monitor will display:
• 90 %SpO
2
• 60 BPM
• no alarm
• low level modulation
1. Press the SRC-MAX LIGHT LEVEL selection button. The SRC-MAX
Light Level LED will light.
2. The monitor will waveform display will go flat and stabilizes at the low
light level.
3. The monitor will display:
• 90 %SpO
2
• 60 BPM
• no alarm
• low level modulation
4. Press the SRC-MAX LIGHT LEVEL selection button. The SRC-MAX
LIGHT LEVEL
5. The monitor waveform display will spike and stabilize at a lower light
level.
LED will light.
Performance Verification
27