Nellcor OXIMAX N-595 Service Manual page 34

Performance Verification
Test #3: Modulation
Level
26
6. The monitor will display:
• 90 %SpO
2
• 60 BPM
• no alarm
• low level modulation
1. Press the SRC-MAX % MODULATION selection button. The SRC-
MAX % MODULATION
2. The monitor waveform display will spike and stabilizes at a higher
modulation level.
3. The monitor will display:
• 90 %SpO
2
• 60 BPM
• no alarm
• high level modulation
4. Press the SRC-MAX % MODULATION selection button. The SRC-
MAX % MODULATION
5. The monitor waveform display will stabilize at a lower modulation level.
LED will light.
LED will light.