Security Codes and Authority Levels (cont'd)
T o C h a n g e a U s e r ' s C o d e
1.
Enter Master or Manager Code and press the
2.
Enter the new code for that user.
Assuming you want to reprogram user 003 from 5678 to 6789 using the master code of 1234, the
syntax reads as follows:
8
1234 +
+ 003 + 6789
CODE
Once entered the following prompts will appear.
ADD NEW USER?
0 = NO , 1 = YES
USER 002 CHANGED
SUCCESSFULLY
8
A
CODE
The system recognizes that the user number is already in use
and will prompt whether or not this is a new user.
Enter 0 to change the existing user's code.
The system will confirm that the change is allowed based on
authorization level, and if so, will put the new code into effect.
NOTE: If changing one's own code, the system will prompt for
the new code to be re-entered. This prevents
accidentally changing one's own code.
16
key + user number to be changed.