To Change A User's Code - Honeywell VISTA-128BP User Manual

Security Codes & Authority Levels (cont'd)
PART. 1 A0* WHSE
USER 003 AUTH=3G.

To Change a User's Code

1. Enter Master or Manager code and press the
to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO , 1 = YES
USER 002 CHANGED
SUCCESSFULLY
– 20 –
When all partitions have been displayed, the
keypad will scroll through the partition(s) to which
access has been assigned, and will display the user
number, authority level and global arm option for
each. The "G" after the authority level indicates
that the global arm feature is active for this user in
the displayed partition. The "*" indicates the
partition from which this user can be changed or
deleted. The "." at the end of the second line
indicates that this user sends open/close reports.
Open/close reporting is automatically active for any
users added by you, if you have open/close reporting
active.
The system will recognize that the user number is
already in use and will prompt whether or not this
is a new user. Enter 0 to change the existing
user's code to the code entered in step 3.
The system will confirm that the change is allowed
based on authorization level, and if so, will put the
new code into effect.
Note that if changing one's own code, the
system will prompt for the new code to be re-
entered. This prevents accidentally changing one's
own code.
CODE
8 key + user number