To Change A User's Code - Honeywell VISTA-128FBPT User Manual

Commercial fire and burglary partitioned security systems with scheduling

Hide thumbs Also See for VISTA-128FBPT:

Table of Contents

Security Codes and Authority Levels (cont'd)

To Change a User's Code

1. Enter Master or Manager code and press the

to be changed.

2. Enter the new code for that user.

ADD NEW USER?

0 = NO , 1 = YES

USER 002 CHANGED

SUCCESSFULLY

National Security Systems (800)457-1999

The system will recognize that the user number is

already in use and will prompt whether or not this

is a new user.

user's code to the code entered in step 3.

The system will confirm that the change is allowed

based on authorization level, and if so, will put the

new code into effect.

Note that if changing one's own code, the

system will prompt for the new code to be re-

entered. This prevents accidentally changing one's

own code.

http://nationalsecuritysystems.com

CODE

key + user number

Enter 0 to change the existing

– 21 –

Table of Contents

Vista-250fbpt