To Change A User's Code; To Delete A User - Honeywell ADEMCO VISTA-120 User Manual

Security Codes & Authority Levels (cont'd)

To Change a User's Code

1. Enter Master or Manager code and press the
to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO , 1 = YES
USER 002 CHANGED
SUCCESSFULLY

To Delete a User

1. Enter Master or Manager code and press the
to be deleted.
2. Enter Master or Manager code first entered.
OK TO DELETE
0 = NO , 1 = YES
USER CODE
DELETED
– 20 –
The system will recognize that the user number is
already in use and will prompt whether or not this
is a new user. Enter 0 to change the existing
user's code to the code entered in step 3.
The system will confirm that the change is allowed
based on authorization level, and if so, will put the
new code into effect.
Note that if changing one's own code, the
system will prompt for the new code to be re-
entered. This prevents accidentally changing one's
own code.
The system will recognize that the User number
is already in use and will prompt to confirm that
it should be deleted. Press 0 (NO) or 1 (YES).
If yes, that user's code will be removed from all
partitions to which it was assigned, and all
authorization levels and other information about
that user will be deleted. Note that a user can
only be deleted from the partition in which it was
first assigned, and can only be deleted by a user
with a higher authority level. A User's security
code cannot be deleted by oneself.
CODE
8 key + user number
CODE
8 key + user number