Access Door Control; General Information; Executing - Honeywell VISTA-128BPT User Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
G e n e r a l I n f o r m a t i o n
Your system may be set up such that a locked access door (such as in a lobby) can be unlocked
momentarily or for a specific period of time, using a keypad command. Ask your installer if this has
been done in our system.
E x e c u t i n g
There are several entries that can be entered at the keypad to activate this command:
1. Enter your security code + [0].
The door will unlock for 2 seconds.
2. Enter your security code + # + 73, or security code + # + 74 + access point.
The door will unlock for a specific period of time.
3. Enter your security code # + 75 + access point + function.
4. The functions available are available.
Grant .............. will temporarily unlock a door to allow an access.
Protect .......... will cause a door to unlock only when a valid access is received.
Bypass .......... will cause a door to be permanently unlocked to allow continuous access.
5. Access control functions may also be executed use your security code + # + 77. See Using
#77 Instant Activation Mode later in this manual.
Section 24: Access Door Control
43