Panic Keys; Using Panic Keys; Activate Panic Functions; Silent Emergency - Honeywell VISTA-128BPT User Manual

Section 22: Panic Keys
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
(Manually Activation Silent and/or Audible Alarms)
U s i n g P a n i c K e y s
Your system may have been programmed to use special key combinations to manually activate panic
functions. The functions that might be programmed are Silent Emergency, Audible Emergency,
Personal Emergency, and Fire. See your installer for the function(s) that may have been programmed
for your system.

Activate Panic Functions

(Your installer should note which function(s) is active in your system.)
Keys
1 and *
3 and #
* and #
A
B
C
To use a paired key panic function, simply press both keys of the assigned pair at the same time.
If your keypad(s) have lettered keys for panic functions, press the designated key and hold down for at
least 2 seconds to activate the panic function.
SIA Installations: Lettered keys not for use in CP-01 installations.

Silent Emergency

Sends a silent alarm signal to the central station, but there will be no audible alarms or visual displays.

Audible Emergency

Sends an emergency message to the central station (if connected) and will sound a loud, steady alarm
at your keypad and at any external sounders that may be connected (ALARM plus a zone number
would also be displayed).
A personal emergency alarm sends an emergency message to the central station (if connected) and
will sound at Keypads, but not at external bells or sirens. (ALARM plus a zone number would also be
displayed.)

Fire Alarm

Sends a fire alarm message to the central station and will uniquely sound external bells and sirens
(FIRE plus a zone number would also be displayed).
Zone Function
995
996
999
995
999
996
40