Arming Stay; Auto-Stay Arming - Honeywell VISTA-128BPT User Manual

Arming STAY

Check with your installer for a list of the zones that are bypassed during each STAY mode. Before
arming close all perimeter windows and doors (see CHECKING FOR OPEN ZONES section).
1. Enter your User Code
ARMED ***STAY 1*
2.
ZONE BYPASSED
A u t o - S T A Y A r m i n g
Auto-stay allows the system to automatically bypass certain zones if upon arming none of the
entry/exit zones are faulted during the exit delay time (no one exits the premises). The system provides
an option to set each burglary zone for Auto-stay.
All zones enabled for auto-stay except for perimeter and day/night types of zones, have exit delay time
when the partition is armed.
Check with your installer for the zones assigned for Auto-STAY.
NOTES:
•
Auto-STAY applies to all four arming modes (AWAY, STAY, INSTANT and MAXIMUM).
•
Arming the partition AWAY via an RF transmitter overrides the Auto-stay feature (partition will
not bypass zones programmed for auto-stay).
Arming STAY with Entry Delay (Cont'd)
3
+ 1 for STAY Mode 1,
+
STAY
3
or +
STAY
The keypad beeps three times, displays the armed message,
and indicates which STAY mode (1, 2 or 3).
Note: "ZONE BYPASSED" in this display simply indicates that
some zones of protection are not armed when using STAY
mode.
3
STAY
3 for STAY Mode 3
31
+ 2 for STAY Mode 2, or