Honeywell VISTA-128BPT User Manual page 74

Quick Guide to System Functions (cont'd)
Change a User's
Code
Delete a User
Real-Time Clock
Control Output
Device
Randomize Output
Device
Access Control
1. Enter master/manager code.
2. Press CODE [8].
3. Enter user's 3-digit number.
4. Enter new code for that user.
5. Press 0 (No) at prompt.
1. Enter master/manager code.
2. Press CODE [8].
3. Enter user no. to be deleted.
4. Enter master/manager code.
5. Press 1 (Yes) at prompt.
Enter Master code. Press #
Enter security code. Press #
Enter 71 or 72.
Enter security code. Press #
Enter 70.
Enter security code. Press #
Enter 77.
Enter security code. Press #
Enter 41
Enter security code. Press #
Enter 42.
Enter 0.
Enter security code. Enter 0.
Enter security code
Press [#]. Enter 73.
Enter security code
Press [#]. Enter 74.
Enter access point number.
Enter security code. Press # .
Enter 75. Enter access point number.
Enter state (1-3)
Master & Manager level users can change
their own or other users' codes.
Master & Manager level users can delete
users.
A user can only be deleted by a user with
higher authority level.
Press [∗] or [#] to move cursor. Enter time and
+ [63].
date accordingly. Press any key (0-9) for
AM/PM.
Activate output device as programmed.
Activate output device manually
Activate output device or system event
instantly
Randomize output devices set for random
schedules
Randomize output devices set for random
schedules with activation times between 6 PM
and 5 AM
Exit multi-partition multi-panel mode and
multi-panel view mode.
Activate access relay for current partition.
Request to enter or exit at a console.
Request to enter or exit at an access point.
Change the access point state.
68