Arming Stay With No Entry Delay; Using The 7 Instant Key; Operation; Instant Modes - Honeywell VISTA-128BPT User Manual

Section 14: Arming Stay with NO Entry Delay
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
U s i n g t h e 7
Important!
If you are using a Graphic/Touch-Screen Keypad, NIGHT mode is the same as INSTANT.
Use this key when you are staying home and do not expect anyone to use the entrance door.

Operation

When armed in INSTANT mode, the system will sound an alarm if a protected door or window is
opened, but you may otherwise move freely throughout the premises. The alarm will also sound
immediately if anyone opens the entrance door.

Instant Modes

The system provides three INSTANT modes; INSTANT modes 1, 2 and 3.
•
INSTANT modes 1 and 2, when activated, automatically bypass specific zones assigned by your
installer to each of the INSTANT modes.
•
INSTANT mode 3, when activated, automatically bypasses all zones assigned to INSTANT modes
1 AND 2.
Check with your installer for a list of the zones that are bypassed during each INSTANT mode.

Arming INSTANT

Before arming close all perimeter windows and doors before arming (see CHECKING FOR OPEN
ZONES section)
1. Enter your User Code
ARMED ***STAY 1*
2.
ZONE BYPASSED
NOTE: If none of the zones in a partition are assigned to INSTANT mode 2, then when the user
enters User Code +
bypassed.
I N S T A N T K e y
7
+
A
I NSTANT
E
7
A
I NSTANT
E
The keypad beeps three times, displays the armed message,
and indicates which INSTANT mode (1, 2 or 3).
Note: "ZONE BYPASSED" in this display simply indicates that
some zones of protection are not armed when using INSTANT
mode.
7
, all zones assigned to INSTANT mode 1 are automatically
INSTANT
1
+ for INSTANT Mode 1,
A A A
E E
E
INSTANT Mode 2, or
3
+ for INSTANT Mode 3
A A A
E E
E
32
7
2
+ for
A A A A
I NSTANT
E E
E E