Maintaining Your System (cont'd)
S i l e n c i n g L o w B a t t e r y W a r n i n g T o n e s a t t h e K e y p a d
The keypad's warning tones can be silenced by performing an OFF sequence (code plus OFF key), but
the Keypad's low battery message display will remain on as a reminder that you have a low battery
condition in one or more of your sensors. When you replace the weak battery with a fresh one, the
sensor will send a "good battery" signal to the control as soon as the sensor is activated
(opening/closing of door, window, etc.), causing the low battery display to turn off. If the sensor is not
activated, the display will automatically clear within approximately 1 hour.
R o u t i n e C a r e
•
Treat the components of your security system as you would any other electrical equipment. Do
not slam sensor-protected doors or windows.
•
Keep dust from accumulating on the keypad and all protective sensors, particularly on motion
sensors and smoke detectors.
•
The keypad and sensors should be cleaned carefully with a dry soft cloth.
any other fluid on the units.
66
Do not spray water or