Event Log Procedures; General Information; To Display The Event Log - Honeywell VISTA-128BPT User Manual

Section 29: Event Log Procedures
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
G e n e r a l I n f o r m a t i o n
The system has the ability to record various events in a history log wherein each event is recorded in
one of five categories (listed below), with the time and date of its occurrence.
•
Logs up to 1000 events with the oldest event being replaced by the logging of any new event
after the log is full.
•
Using an alpha keypad, the Event Log can be viewed one category at a time, or can display all
events, regardless of category (ALL EVENT LOG).
•
The system also allows selection of completed log, or only those events occurring since the last
installer service (RECENT).
•
Events in the other partitions can be viewed by users authorized to access those partitions
NOTE: Events are displayed in chronological order, from most recent to oldest.
T o D i s p l a y t h e E v e n t L o g
Enter your Security Code + # + 6 + 0
1.
NOTE: The entered secured code has to be a master or manager authority level.
Select the display mode and press
2.
the desired option
ENTER 0 = RECENT
1 = COMPLETE DUMP
3. Select the partition, 0-8
SCAN LOG BY PART
0 = NO 1-8 = PARTITION #
RECENT .............. Displays only those events
occurring since last Event Log Clear
command was executed.
COMPLETE ....... Displays complete event log (up to
1000 events)
Enter the partition number for the partition whose
events are to be displayed.
NOTE: Entering 0 (NO) displays all partitions'
events.
54