Section 10: Checking For Open Zones
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
∗
U s i n g t h e
Before arming your system, all protected doors, windows and other protection zones must be closed or
bypassed (see BYPASSING section). Otherwise the keypad will display a "Not Ready" message. Using
the READY key will display all zones that are faulted, making it easier to secure any open zones.
Showing Faulted Zones
1.
DISARMED - PRESS
∗ TO SHOW FAULTS
2.
Do not enter security code, but simply Press
3.
FAULT 005 FRONT
UPSTAIRS BEDROOM
4.
****DISARMED****
READY TO ARM
R E A D Y K e y
NOTE: Some keypads light a green LED when the system is
Typical fault display
Secure or bypass the zones displayed before arming the
system.
The "Ready" message will be displayed when all protection
zones have been either closed or bypassed.
NOTE: All or part of this message may be replaced by a
ready. If not lit, the system is not ready to be armed.
∗
READY
customized message programmed by the
installer. Bear this in mind whenever the
instructions indicate that the "DISARMED" or
"READY" message will be
24
displayed.