Honeywell VISTA-128BPT User Manual page 15

9 CHIME
A
Turns on & off the CHIME mode. When on, any
entry through a protected delay or perimeter
zone while the system is disarmed will cause a
tone to sound at the Keypad(s).
∗ READY
A E
When depressed prior to arming the system, the
keypad will display all open protection zones
within the keypad's home partition. This key is
also used to display all zone descriptors that
have been programmed for your system, by
holding the key down for at least 5 seconds.
#
A
Permits ARMING of the system without use of a
security code ("Quick Arm", if programmed).
Functions of the Keypad (cont'd)
KEYS 0-9
Used to enter your individual security access
code(s).
LED READY INDICATOR
(GREEN) Lit indicates system is ready to be
armed, while unlit indicates system not ready.
LED ARMED INDICATOR
(RED) Lit when the system has been armed
(STAY, AWAY, INSTANT or MAXIMUM).
SPEAKER
Source of audible internal warning and
confirmation sounds, as well as alarms (see
"Summary of Audible Notifications").
FUNCTION KEYS
These keys can be used for Speedkey (macros)
functions or panic keys. Refer to the SPEEDKEY
(MACROS) and PANIC KEYS sections for
descriptions of these functions.
9