Malaguti SPIDER MAX GT 500 Service Manual page 25

SPIDER MAX 500 - EURO 3
• Free the fairing from the front and the two side retainers
(A).
To facilitate the separation of the locking tabs,
remove the access covers to the front
direction indicators, insert one hand and force
it.
Release the fairing from the front locking tab.
• Extract the fairing with care, remembering that it is
anchored to the parking light wiring.
• Extract the parking light bulb and remove the fairing
completely.
ACCESSES
• After removing the central fairing it is possible to reach
the dashboard connector (A), the braking distributor (B),
the headlight beam adjusting knob and the horn (not shown
in the figure).
F. 11
F. 8
F. 9
F. 10
25 07/06
D
A