Malaguti SPIDER MAX GT 500 Service Manual page 65

SPIDER MAX 500 - EURO 3
• Extract the tank, sliding it from the front side of the frame,
downwards.
• Disconnect the tube (C).
• After extracting the tank, release the screw (V - F. 64 -
69), releasing it from the support (T - F. 64 - 69).
FUEL SUPPLY PUMP
• The procedure to remove the fuel supply pump (A) and
its float (B), can be understood from the picture on the
side.
• Check the conditions of the gasket (C) and replace it, if
necessary.
• Carefully clean the mesh filter (D).
NOTE - All of the information on the pump can be de-
ducted by reading the Manual "Injection".
F. 69
F. 70
F. 71
65 07/06
E
C
V
T
C
A
C
D
B