Handlebar - Malaguti SPIDER MAX GT 500 Service Manual

SPIDER MAX 500 - EURO 3

HANDLEBAR

To remove the handlebar:
• Remove the handlebar cover: upper, front and rear
(S/D - P. 32 - 33).
• Cut the clips securing wiring, tubes, and cables.
• Remove the (right and left) brake master cylinders
(S/E - P. 44).
• Release the transmissions from the accelerator control
(B).
• Release the two counterweights (P).
• Detach the two twistgrips (M).
• Release the two switches (D).
• Release the screws (V4).
• Remove the plate securing the handlebar (A).
• Remove the handlebar (C).
V
4
P
B
F. 36
Tighten in a criss-cross pattern.
30 ± 20%
M
D
C
F. 35
D
V
4
A
55 07/06
V
4
M
P
E