Rear Brake) Disc - Malaguti SPIDER MAX GT 500 Service Manual

SPIDER MAX 500 - EURO 3

(REAR BRAKE) DISC

During the check and the service on the rear brake
calliper, check the disc conditions (C). If the disc is too
worn out, (service limit 3.5 mm), replace it, releasing
and removing the screws (V6), including their washers
(D). In case of irregular wear or scoring, carry out the
grinding.
V
6
During the disc reassembly, observe the
rotation direction of the disc, understandable
from the orientation of the lightening holes (as
shown in pictures).
REAR CALLIPER DISASSEMBLY
• Remove the retaining ring (A) of the spindle securing the
brake pads (B).
• Detach the spindle securing the brake pads (B).
• Extract the clip (C) and the two brake pads (D).
• Let a little compressed air in, so as to let the two pistons
out of their seats in the two housing halves composing
the calliper.
11 ± 10%
F. 22
C
D
F. 23
B
F. 24
F. 25
49 07/06
B
V
D
C V
6
D
B
A
C
D
E