7.4.5
Installation
Installation
1. Place the component on the DIN rail.
2. Snap the component on to the DIN rail. Make sure that the mounting slides at the rear
3. You can now move the component on the DIN rail to the left or to the right to its final
Removal
Figure 7-9
AC Drive
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
Supplementary System Components and Encoder System Integration
latch into place.
position.
Releasing the component from a DIN rail
7.4 Sensor Module Cabinet-Mounted SMC20
253