X41 Ep Terminal / Temperature Sensor Connection; Drive-Cliq Interface X400-X402 - Siemens SINAMICS S120 Manual

3.2.3.5

X41 EP terminal / temperature sensor connection

Table 3-18 Terminal strip X41
Terminal
4
3
2
1
Max. cross-section that can be connected: 1.5 mm² (AWG 14)
NOTICE
The KTY temperature sensor must be connected with the correct polarity.
Note
The temperature sensor connection can be used for motors that are equipped with a KTY84-
1C130 measurement sensor in the stator windings.
3.2.3.6

DRIVE-CLiQ Interface X400-X402

Table 3-19 DRIVE-CLiQ Interface X400-X402
Pin
1
2
3
4
5
6
7
8
A
B
AC Drive
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
Function
+Temp
-Temp
are assigned
are assigned
Name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
GND (0 V)
3.2 Power Modules Chassis
Technical specifications
Temperature sensor connection KTY84-1C130
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronic ground
Power Modules
107